After 5 years of engineering the Warden is finally here! The Warden is the next generation of all out SPL monsters. Forget everything you’ve seen until this point. The Warden is the worlds first true column based neodymium subwoofer that incorporates a common steel top plate. Having one common top plate allows the Warden to generate a uniform amount of magnetic flux throughout the entire gap. This results in a much stronger subwoofer and ultimately higher SPL levels than other subwoofers.
Vehicles that are designed to be high powered SPL machines have requirements that are a bit different than standard daily driven vehicles. They require a subwoofer that can handle extreme amounts of power, both thermally and mechanically, and must be able to do this time and time again. The Warden was designed with SPL competitor in mind, and takes the concept a bit further by increasing the power handling of the subwoofer with a longer 3” 8-layer voice coil assembly. To reduce mechanical fatigue and to maintain linear cone movement throughout the stroke a multiple layer suspension is utilized. The custom tooled cone used on the Warden subwoofer is of a composite material that has one of the highest strength/weight ratios on the market. The lead wires are sewn to the suspension pack in order to both eliminate noises from the lead slapping the cone, and to reduce movement of the leads which can cause them to break.
The Warden has been lurking in the shadows for years, the rumors and myths that surround this driver have been circulating the internet for what seems like ages, but it’s finally here and we consider this to be our proudest accomplishment to date.
• 8 Spoke Black Cast Basket
• 3" Heavy Gauge 4 layer Flat Aluminum Voice Coil
• Quad Black Progressive Spiders with Heavy Gauge Woven Tinsels
• High Pressure Kraft Fiber Reinforced Cone
• Multi-Layer Foam Surround
• 6 Column Neodymium Motor Structure
• Interlocking Aluminum Spider Spacer Assembly
• CILD - Center Interlocking Dustcap
• ADC - Air Driven Cooling - Six Column Vents for Max Motor Cooling
• Nickel Push Terminals
• Wrap Around Rubber Gasket
• 2500 Watt RMS Rated
• DVC .7, 1.0, 1.4, or 2.0 ohm configurations
|Driver||12 Inch||15 Inch||18 Inch||21 Inch|
|Re||2 ohm series||2 ohm series||2 ohm series||2 ohm series|
|Sub Diameter||12 3/8 inches||15 1/2 inches||18 1/2 inches||21 1/4 inches|
|Mounting||11 1/8 inches||14 1/8 inches||16 7/8 inches||19 1/4 inches|
|Mounting Depth||8 1/4 inches||9 1/4 inches||10 5/8 inches||11 1/4 inches|
|Driver Displacement||.21 cubic ft.||.22 cubic ft.||.24 cubic ft.||.25 cubic ft/|
|Power||2500 Wrms / 5000 Peak||2500 Wrms / 5000 Peak||2500 Wrms / 5000 Peak||2500 Wrms / 5000 Peak|